Batten Board Shutters – If you are hunting for a way to brighten up the exterior of your house, batten board shutters are an reasonably priced option. These do it your self shutters don’t take a lot of time to make and are a a lot more expense efficient option that repainting or re-shingling the outdoors of your residence.
Ahead of you can start off producing them, you will want to know how massive to make your batten board shutters. To do this, measure the length and width of the windows you want to shutter. Batten board shutters are normally the same length as the windows, but only half the width. This is to ensure that they complement the windows and don’t overtake them.
When you have your measurements, you will need to have to purchase the wood to make your shutters. Whilst you can pick any wood that you like, cedar is the most generally utilized wood for shutters due to its durability. Every window shutter will call for at least two pieces that are every the very same width as your measurements. If you are shuttering an very long window, you may possibly want to use a third horizontal piece to maintain the shutters balanced seeking. With the vertical pieces you will want 3 that, when added with each other, equal the total width that you want for the shutters.
Location one particular of the vertical pieces on a flat surface, like the floor or a table. Utilizing the waterproof glue, attach it to a second vertical piece creating positive that the tops and bottoms of the two pieces are flush and even. Then attach the final piece to the very first two pieces, also making sure that it is flush and even. Do the same for the other three vertical pieces that will make up the second shutter.
Subsequent you will attach the horizontal pieces (the battens). Depending on the length of the window, you will want to location your battens between 8 and 12 inches from the bottom and the leading of the shutter. (If they are shorter windows, you will want to stick with eight inches.)
The battens are supposed to be evenly spaced from the top and bottom, but not evenly spaced from each and every other. As soon as you have marked the right spot, attach the battens using the wood glue. You can also nail the battens to the shutters with a nail gun, generating confident that the nails go via the outward facing side of each shutter. Space the nails approximately five inches apart
When assemble, paint or stain your shutter using a waterproof stain or paint. Let the shutters dry just before attaching them to your residence. Drill a 2 3/four inch screw into each corner of the shutter.