Build A Crawl Space Door – Getting a crawl space in the house is a excellent addition since it adds extra storage space, but with no a safe crawl space door the added storage could grow to be a hazard. Although this added storage space exists there are no guarantees that it has a door. This means that youngsters or pets could potentially discover their way inside this dark region. It is crucial to add a crawl space door to make certain that this never ever occurs. The following information will show you how to make your personal crawl space door.
Step one – Sizing the Door Up
Some crawl spaces have doors but other individuals do not. This tends to make sizing very crucial. If there is a door then you are in luck. You can merely take away the existing door and trace its dimensions on to the plywood. If, sadly, you are not this lucky then you will have to take down the measurements of the frame and then transfer them to the piece of plywood. Use the tape measure to measure the length, width, best and bottom of the crawl space entrance. Be sure to take the measurement on the inside of the frame. The door wants to be capable to match inside of the frame or else it will not close correctly. Write down the measurements and then record them to the plywood.
Step two – Preparing the Crawl Space Door
With the dimensions of the door transcribed to the plywood you can now use the saw to reduce it from the bigger piece. As soon as the door is free from the wood you can sand down the edges slightly to take away the rough edges and any wood that may possibly result in splinters. Take the door to the crawl space and test it in the frame for fit. After you are happy that the door will fit you can begin to assemble the hardware.
Step three – Adding the Hardware
Regrettably, the crawl space door will not just sit there so it has to be attached to the frame. To do this you require to add the hardware. Begin by adding the hinges. Measure 2 inches from the prime and the bottom and make a hash mark. This is where the hinges will be placed. Location the 1st hinge so it is centered more than a single of the hash marks with the center post facing up. Attach the screws and repeat with the second hinge. Now, location the handle on the other side of the door. Measure halfway down from the leading and several inches toward the inside. Set up the handle with the screws. Repeat this with the latch but placing it slightly above the manage.
Step four – Attaching the Door
Take the door to the crawl space and fit it in spot. Use the drill to make pilot holes for the other side of the hinges then attach them. Place the second part of the latch on the other hand of the frame on the outside. Add a padlock and you are finished.