Facts That Nobody Told You About How To Install Vinyl Baseboard

How To Set up Vinyl Baseboard –

A vinyl cove base is an straightforward to set up alternative for these who have installed vinyl flooring. They resist scuffs, appear excellent, and are very easy to clean. Installing them is simple providing you have the proper tools and a little patience. Here’s what you need to do.

Supplies Needed:

-Utility Knife (A new blade is advised)
-Cove Base
-Framing Square

Step 1- Picking the Cove Base

You want to pick your vinyl cove base first. Numerous people will choose to use a complimentary color for the base, other individuals will want it the exact same colour as the wall. The decision is yours. You will be able to locate cove base in just about every single color under the sun.

Step 2- Appropriate Measurements

Measure to locate how a lot molding you will need to have to install. Commence in the corner when measuring and work your way out. The molding will want to be installed 1st, so this is important.

Step 3- Begin Laying It Out

Lay a piece of the base down on it is face on top of a piece of wood. Measure this to match the molding you measured earlier. Use the framing square to mark a line.

Step 4- Reduce the Cove

With the base cove nonetheless lying on the flat wood, reduce via it. Press down firmly on the framing square to ensure your cut is even. You may possibly have to make many passes at it to cut it all the way through.

Step 5- Glue It Up

Use the adhesive you bought created particularly for vinyl and apply it to the wall. Press the cove firmly against the wall to make sure you have an even bond.

Step six- Perform with Second Strip

Read More:  Things You Probably Didn't Know About Plasma Cutting Aluminum

Now you can commence to measure for your subsequent strip. Attach the second strip subsequent to the first one particular. Hopefully you’ve produced perfectly straight cuts. A straight cut will get rid of noticeable seams and you will not be able to see where the two pieces butt against each and every other.

Step 7- Functioning with Inside Corners

Use the inside corner of the wall to carve a curved portion. You want this to be seamless so it will not look off. After you have a curve reduce out you can adhere it to the wall making use of the very same glue.

Step eight- Outdoors Corners

Use your marker to location a mark on the back of a piece of cove. This is the piece that will be placed on the outdoors corner. Bend the two ends with each other to kind a slight seam to make it simpler to apply.

Step 9- Glue the Corners

You will want to slice a tiny much less than half of the bend piece to make it less difficult to set up. Don’t slice all the way through, just slightly on the back side. Adhere this piece to the wall.

Step ten- Finish the Room

Continue this process all around the room till you have your vinyl cove base installed totally.

You will want to wait to clean the new cove base till the adhesive totally dries. It may possibly feel safe long prior to it has cured. Stick to the directions on the glue to locate this amount of time.

A cove base is a excellent way to add a distinctive touch to any wall. With the ease of installation, this is a great project for any individual to attempt.

Installing a Vinyl Cove Base Step-by-Step