How To Strip Cabinets –
To successfully strip stain from wood, its best to comprehend the make up of this finish. Stain is made of a pigment, a binder and a solvent. The solvent is the component of the stain that tends to make the binder and pigment sink into the grains of the wood. Via the approach of evaporation, the solvent dissipates and the stain pigment becomes embedded in the wood. To eliminate the stain from the wood, a thin layer of the wood will also have to be removed. You will require to choose if it is worth that effort, or if you would rather clean and paint more than the stain on the cupboards.
Step 1 – Preparing for the Stain Removal
Use the screwdriver to eliminate the screws securing the the cupboard doors and the cabinets. Put the screws into a small container so that you don’t lose any of them. Take away the cupboard doors and then get rid of all of the hardware on them. Fill the sink with warm, soapy water. Place all of the hardware into the sink to soak. Use the toothbrush to scrub any residue off of the hardware. Empty the sink and put the hardware on a towel to dry. If your cabinet doors have veneer coverings, it may possibly be ideal to use a veneer wood cleaner rather than removing the stain. Be confident all of the wood in your cabinetry is sturdy and secure.
Step 2 – Removing the Stain
Be certain that the stain remover you have selected is safe and advisable for employing indoors. Read the distinct guidelines for the remover ahead of you begin. Place on your protective eye wear and rubber gloves. Use either the paintbrush or old cloths to apply the remover to the cupboards, based on the manufacturer’s guidelines. Use the sandpaper to sand down the surface of the cupboards to get rid of the original stain finish. Take off as much of the stain as you can. Apply one more coat of the stain remover. Cover these surfaces with wax paper and let them sit for a half hour. Get rid of the wax paper and place it directly into the garbage bag. Wipe the remover from the cupboards and then rinse them. The wax paper should support in removing a lot more pigment from the wood. Sand the wood again.
Step three – Sealing the Wood
Sanding and stripping is hard on wood. As soon as you have finished sanding, you will need to strengthen the wood surface prior to you can add a new stain. Apply a sealant to the wood to protect and strengthen it. As soon as once more, study the particular instructions for the item just before you begin. Let the sealant enough time to dry when you have finished.
Step 4 – Testing the New Finish
Most wood keeps some of the original stain pigment even soon after a lot of sanding. When deciding on the color for your new finish, be sure it will function properly with any of the remaining stain. Apply a little amount of the new stain to a element of the cupboards that is not simply noticed. Numerous occasions the wood inside the cabinets is various from the wood used on the doors. Be certain to test the new stain on both of the surfaces.