Fireplace Insert Repair – Installing a all-natural gas fireplace insert can boost the look of an existing fireplace and maximize its efficiency at the exact same time. But, from time to time, difficulties may possibly create within the insert itself. In order to diagnose and repair these problems, try following the actions beneath.
Turn off the Gas and Electricity
Usually turn off the gas when functioning on a natural gas fireplace to decrease the chance of an explosion. Simply because these fireplaces are operated by switch, it might be smart to turn off the electrical energy as nicely to minimize the opportunity of getting shocked even though functioning on the unit.
Decide the Dilemma
There are many things that can go incorrect with a organic gas insert, but the two most frequent difficulties are cracks or holes building in the firebox about the insert and the fire not beginning when the switch is activated. If a hole or crack is visible in the firebox wall, continue reading step three. If the fire won’t start skip down to step four.
Fill the Crack or Holes
If the firebox about the insert is created of masonry material or brick, the fix is relatively simple. Just trowel retort cement over the broken area. Retort cement is a furnace cement that is rated for really high temperatures. Once the cement has been appropriately applied to the affected regions, let it set for a handful of hours ahead of turning the flame back on. Turning the flame on will expedite the drying process of the cement, but drying it also rapidly or too quickly may possibly trigger the cement to crack. If the firebox about the insert is metal, it may possibly be slightly difficult to repair. Any cracks in the metal will require to be welded shut. A skilled do-it-yourselfer will be capable to use a welder to do the job, but it could be sensible to contact a expert welder if 1 is not comfy attempting this fix.
Clean the Unit
If the insert will basically not light, there are a few various things that could be wrong. 1st, try cleaning the insert. Sometimes dust or debris may possibly collect inside the fireplace and plug the area from which the gas is released inside the insert. Clean this area completely to make certain no plugs exist.
Attempt Relighting the Pilot Light
If the pilot light has gone out, the fireplace will not be in a position to start up. Furthermore, turning off the gas to the insert prior to functioning on it, as a safety precaution, will have ensured that the pilot light is gone. So, to relight it, turn the gas and electrical energy back on and examine the gas valve situated in the back of the fireplace. Make certain the valve is set to pilot. Carefully, light the pilot light with a long match or lighter. Test the fire location. If the flame nevertheless does not sprout up, turn the gas back off before continuing any function on it.
Replace the Thermocouple
Find the thermocouple mounted on the pilot assembly. Most thermocouples can be unscrewed by hand and are simple to locate a replacement for. The most crucial detail is the size of the thermocouple, simply because the replacement have to be the precise identical size as the original in order for it to work effectively. Just screw the new thermocouple into spot, relight the pilot light and test the fireplace insert.