Here’s What No One Tells You About Refinishing Butcher Block

Refinishing Butcher Block –

Butcher block countertops can be sensible and beautiful in a kitchen. 1 of the good aspects of getting one particular of these wooden countertop is that it can be refinished to look like new – or at least, almost new. Refinishing a butcher block countertop is not challenging, and with a little time and work you can be revitalize yours just by following the data below:

Step 1 – Clean Your Countertop Thoroughly

If you have determined that your butcher block is absolutely in require of refinishing, you will want to first eliminate any meals residue, grease, or oil, so that your countertop is completely clean prior to you commence the refinishing approach. This can merely be completed with a cloth or sponge dampened in a water and mild detergent resolution.

Step 2 – Sand Your Countertop

If you have superficial scratches or stains on your countertop, eliminate them by sanding the surface. Avoid employing polyurethane or varnish on a wooden countertop since if moisture can seep through the cracks and scratches in this sealant and harm the countertop. Consequently, if you have noted that your countertop has polyurethane or varnish, now would be a excellent time to get rid of it with sandpaper.

The grade of sandpaper you use will depend on the severity of harm to your countertop. If the wood seems to be heavily scratched, use a 80 grit sandpaper to eliminate these scratches. To restore your stovetop surface to a a lot more smooth condition, finish sanding with a fine grit sandpaper. If heavy scratches stay, use a far more coarse grade. Continue sanding till you have removed all scratches and until you have attained the desired texture.

Read More:  Unbelievable Facts About Remove Pop Rivet

Step three –  Use Caution When Sanding

Use caution when sanding to remove scratches. You will want to make confident that you maintain the surface smooth and even. Also don’t forget to constantly sand in the direction of the wood grain.

Step four – Remove Residue

When you have sanded the countertop to your satisfaction, wipe off all dust and debris left on the surface with a clean cloth and hot, soapy water.

Step five – Oil the Countertop

There are a lot of different types of oils you can use on butcher block surfaces, some of them extremely expensive. The greatest type to use is a mineral oil, generally offered at a regional pharmacy, hardware retailer, or home improvement center. Steer clear of employing cooking oil on your butcher block, as it will normally produce an odor in your wood, which in turn will be absorbed and retained by food prepared on it.

Step 6 – Finish

When applying oil to your countertop, use a clean cloth or a sponge. Apply the oil to your cloth and wipe the oil into the wood’s surface until the wood won’t absorb any more of the oil. Even though you might not prefer to have an oil residue on your countertop, this oil is not likely to harm the wood. Preserving your countertop from drying will likely offset any oily appearance.

How to Refinish Butcher Block Countertops