Shower Glass Panel –
A rudimentary repair for a shower is to set up a new glass shower panel. A glass shower panel can be the door of the shower or an additional panel. If a panel crack, it can be hazardous. Replacing or exchanging a glass shower panel isn’t challenging. It is one thing you can do on your own. Comply with these steps to set up a glass shower panel.
Step 1 – Tightening the Screws
The glass shower panel is held in location by metal grips covered with rubber. Tighten the grips cautiously. Even even though the glass is quite powerful, it can break if as well a lot pressure is employed to hold the panel in spot. When you tighten the screws, always do so slowly and methodically. Tighten on the initial side a brief turn and repeat on the second side. Continue in this style till the grip is tight and the glass shower panel does not move.
Step 2 – Only Use Tempered Glass
You can not use ordinary glass as a shower panel. Typical glass is really thin and versatile. If you were to slip in the shower and reach out, the glass would easily shatter. Tempered glass is strengthened with heat and pressure. It is considerably thicker and stronger than an ordinary pane of glass. It shatters in round, non-sharp pieces
Step 3 – Precise Measurements
A shower glass panel is not a normal piece of glass. The sizes can differ. If you use a piece of tempered glass that is also massive, then it would hit against the other shower glass panels. If the piece is too modest, it will generate also much of a gap amongst the stall and the floor, enabling water to escape. Always use a tape measure to get the measurements of the shower glass panel you are replacing just before acquiring a new 1. Performing so will make sure that the glass panel is right and dilemma cost-free.
Step four – Handling the Glass Shower Panel
Mishandling the glass panel can trigger it to shatter or chip, as well as hurt you simply because they are not light. Always carry the panel upright and have somebody aid you. Preserve the glass panel wrapped in padding even though you are moving it to avoid it from breaking scratching.