Garbage Disposal Splash Guards –
A garbage disposal splash guard can be a challenging approach to replace. This, like any other do it your self house repair project, can be hard if you never have the correct info.
Step 1: Turn off the Breaker Switch that Controls You Garbage Disposal
You need to never ever take probabilities with your safety. The initial rule of every single job that involves electricity it to make sure that you can not get hurt. This is the 1st step that you ought to always take.
Step 2: Remove the Drain Pipe kind the Disposal
You need to begin the project by removing the drain pipe from the side of the garbage disposal. This demands that use of a flat blade screwdriver. You should loosen the screws by turning them in a counter clockwise direction till they come out of the garbage disposal.
Step 3: Separate the Garbage Disposal From the Sink
Wedge the screwdriver amongst the dog ears where the sink meets the garbage disposal. Push it in a clockwise direction about 1/4 of a turn. The garbage disposal will unlock and fall off of its sink mount.
Step 4: Get rid of the old Garbage Disposal Splash Guard
Now is the massive moment. You are going to attain into the garbage disposal and get rid of the garbage disposal splash guard. You have now removed your garbage disposal splash guard.
Step five: Make sure that the Garbage Disposal is Clean on the Inside
Make sure that you have checked your garbage disposal to make positive that absolutely nothing has fallen down inside the disposal unit. Over the years of use a lot of items get dropped down your garbage disposal and now is the very best time to remove them.
Step six: Place the new Garbage Disposal Splash Guard back in the Disposal
Properly here you are at the moment that you have been waiting for. It’s time to put the brand new garbage disposal splash guard back in the garbage disposal. Just place it back in the identical place that you just removed the old one from and you will have replaced your garbage disposal splash guard.
Step 7: Put the Garbage Disposal Back in Spot
Now all you have to do is place the garbage disposal back in spot on its mount, in the unlocked position, and use the screwdriver to place it back in place. Give a excellent push on the handle of the screwdriver, producing sure that the garbage disposal is in spot where it is supposed to be.
Step eight: Replace the Drain Pipe
Make certain that you have put the drain pipe back in spot exactly where it belongs. Your garbage disposal splash guard should final awhile now. It must hold the meals and water out of your face.
Ste 9: Turn the Breaker Switch on again
Turn the electric breaker switch that you turned off back on again and you’re ready to test your new garbage disposal splash guard.