Ingenious Ways You Can Do With Diy Trundle Bed

Diy Trundle Bed –

If you require added sleeping arrangements for overnight guests, a trundle bed frame is a wonderful way to create a bed that can be conveniently slid underneath a larger bed when not in use. Trundle beds are great for youngsters or smaller sized adults and are a wonderful DIY project. This straightforward how-to guide will show you how to construct your trundle bed frame with a few simple hand tools and a couple of hours of your time. Let’s get started.

Step 1 – Measure the Mattress

Ahead of you commence developing the trundle bed frame, measure the length and width of the mattress you will use. The size of the mattress will figure out the measurements of the frame you will need to have to construct.

Step two – Measure and Reduce Base

Measure and cut a piece of three/4-inch plywood that is slightly longer and wider than the mattress by about two inches for every measurement.

Tip: You must make the frame slightly bigger than the mattress so that you can simply get rid of it if you need to have to.

Step three – Measure and Reduce Frame Pieces

Measure and cut two pieces of 2×4 lumber that are the very same length as the piece of 3/four-inch plywood that you trimmed down for the base. Then, measure and reduce two much more pieces of 2×4 lumber that are 3 inches shorter than the width of the base plywood. Note that the pieces require to be shorter simply because they will be the inside facing pieces for the frame. The width of the two other 2x4s will make up the three-inch distinction.

Read More:  Ingenious Ways You Can Do With Diy Door Stop

Step four – Assemble Frame

Layout your lumber so that the two long pieces and two brief pieces form a rectangle. Guarantee that the two shorter elements are the inside facing bracing pieces for the frame. Use a brush or flat stick to apply wood glue to the ends of the short 2x4s. Then, use two 1/two-inch wood screws to secure the frame together. Insert the L-brackets in the corners of the frame and secure with the one-inch wood screws. Make sure the frame is level by utilizing the carpenter’s square.

Step five – Attach Frame to Base

Spot the piece of plywood on prime of the frame and make sure the edges are flush and square. Then, insert 1 1/two-inch wood screws along the perimeter of the frame and base. Space the screws about ten to 12 inches apart.

Step six – Paint or Finish Frame

Choose a color for your new trundle bed frame and paint. Be sure to prime the wood initial for best final results

Step 7 – Attach Casters or Wheels

Align the mounts for the casters or wheels on the corners of the base piece of plywood. Then, use three/four-inch wood screws to attach the casters to the base.

With your project comprehensive, you will usually have accommodations for a guest tucked away beneath your existing bed.

Developing a Trundle Bed Frame