How To Paint French Doors –
French doors have numerous perks. Not only do they add class and charm to a room, but also they let in a lot of light through their glass panes. Generally, French doors are double doors with massive windows divided into a lot of panes. The narrow, wooden framing among every single pane are named muntins. Due to the fact of all the glass, new painters typically have difficulty painting the muntins in French doors. However, painting French doors is a straightforward project you can complete over a weekend if you have the right tactics.
Step 1 – Eliminate the Doors and Lay on Sawhorses
Eliminate the doors from the hinges before painting to hold the doors steady while you function and give you effortless access to all muntins between panes. Lay down a plastic sheet on the location you will be working, and then spot two sawhorses more than the plastic sheet. Spot 1 of the French doors across the sawhorses for a flat, clean operating area.
Step 2 – Remove Hardware
Next, eliminate all of the hardware from the door. This hardware contains the hinges, handles, and any other metal fittings. Check the hinges for any wear, and purchase replacements to set up if want be.
Step three – Use Wood Putty
Use wood putty to fill in any scratches or holes on the door. When the putty has dried, use sandpaper to smooth out any bumps on the surface, and blend the putty with the wood. Use a damp cloth to take off any paint or wood dust.
Step 4 – Use Painter’s Tape
Now, tape off the glass panes with painter’s tape to avert getting paint on the glass. Leave a tiny gap in between the wood and tape, so that 1/16 inch of glass is exposed.
Step five – Prime the Door
Warning: When making use of paint or primer, put on the acceptable safety gear to steer clear of skin make contact with or inhalation of fumes.
To get the greatest results, you need to prime your French doors prior to painting them. Cautiously paint a door with primer and wait for it to dry. Paint as precisely as you can, in extended strokes that follow the path of the wood. Use up-and-down motions for the vertical pieces, and back-and-forth motions for the horizontal. Permit the paint to fill that 1/16 inch gap among the muntin and the tape to aid seal the glass in spot and avoid any air leaks.
Repeating the Method
Even though the 1st door is drying, prime the other door. Don’t neglect to get both sides of the doors. If you’re painting over a bold color, you may possibly need to repeat this method with two coats of primer.
Step six – Apply Paint
After the primer is dry, you can paint the French doors with your chosen colour of paint. Use the identical approach you employed for priming the doors to paint them. Wait for the paint to dry, and then apply a second coat. After dry, repeat the procedure on the other sides of the doors.
Step 7 – Apply Sealant
For doors that face the outdoors, apply a varnish or weatherproof sealant according to the product’s directions. The sealant will defend the paint colour from rain, sun, and snow.
Step eight – Finish Up
When the paint and sealer are dry, replace all the hardware you removed. Use a razor blade to aid lift the painter’s tape off the glass, and then verify more than your operate to see if you need to have to make any touch-ups. After you’re happy with the completed product, hang the French doors back in spot. Be sure to enable for enough drying time just before you hang the doors.