Leaking Outdoor Faucet – Repairing your leaking outside faucet will save you cash and can prevent water damage to your home’s exterior or leakage into your basement windows. Comply with these ideas if your outdoor faucet has sprung a leak.
Step one – Prepare
Locate outdoor water supply valve, which is usually below the kitchen sink or in the basement.
When you find the particular pipe that runs to your outside faucet, turn off the water provide using the shut off valve.
TIP: Bring all your supplies with you on a little tray. Bring a jar for nuts, bolts, and washers so that they never disappear in the lawn or in between your patio paving stones.
Step two – Remove the Faucet Turn Handle
Use the correct size and shape of screwdriver to take off the faucet turn deal with. Set the handle and screw on your tray so you do not shed any components.
Step three – Take away the Spigot
Take the faucet spigot, or tap, off by gripping and turning it with your crescent wrench. Verify the washer inside the spigot. If this washer is damaged or seated incorrectly inside the spigot it, you may possibly have discovered the lead to of your leak.
Step four – Replace the Washer and Test
Dig out the old washer with a flat-bladed screwdriver, and place in a new washer. Reattach the valve and handle, restore the water supply temporarily from inside the home.
Test the outdoor faucet by turning on the water. If the faucet does not leak when you shut off the faucet, you have solved the dilemma. Even so, if the faucet leaks, even with a new washer, you require to once once again turn off the water provide and continue your investigation.
Step five – Access the Faucet Valve Stem
Release the manage and spigot from the faucet again (as in Step four). Use the crescent wrench to reach and turn the packing nut to release it. Lift out the packing nut and pull out the faucet valve stem.
Step six – Replace the Washer on the Faucet Valve Stem
Locate the washer on the bottom finish of the valve stem, and take it off. Replace the old valve stem washer with a new one particular. Verify the valve stem itself for rust, corrosion, and challenging water develop-up that might be interfering with its effectiveness. If the faucet valve stem is damaged, you will need to have to replace it at the plumbing or constructing supply center.
Step 7 – Reinstall the Faucet Valve Stem
Put either the new or old faucet valve stem back into the faucet hole, and reattach the packing nut by making use of your crescent wrench. Apply a thick layer of lubricating grease about the packing nut and its washer.
Step eight – Reattach the Spigot and Faucet Deal with
Reattach the spigot, turning it carefully to stay away from warping or bending it. Screw the deal with back onto the faucet once more. Restore the water provide to the outdoor faucet, and check very carefully for leaks. Keep your eyes open for water drips from the faucet both although water is flowing and when it is shut off.
Replacing washers on both the spigot and valve stem ought to resolve the difficulty.