Learn All About Refrigerator Handle Covers

Refrigerator Deal with Covers –

Regardless of whether you want to snazz up your kitchen or protect a stainless steel refrigerator from fingerprints, a cover for your refrigerator door handle is an easy at-residence project that requires no sophisticated sewing capabilities. This project will aid you make a door deal with cover that is 24 inches lengthy and 1 inch wide.

Step 1 – Decide on Your Fabric

For this project you will want a fabric that holds its shape nicely. Stiff denim, sturdy fleece or felt will operate better than cotton or jersey. These fabrics are typically accessible in numerous colors and prints to match or accent your kitchen. You will need significantly less than a yard for this project, so if you are feeling adventurous or need to have suggestions, now is a great time to check out the scrap bin at your fabric store. You could also make this project out of an old sweatshirt or sweatpants. Find thread that matches your fabric, or use a contrasting thread for a visual twist.

Step two – Reduce Fabric and Sew Hems

Fold the fabric from selvage to selvage. Measure three inches in from the fold and reduce a 26-inch strip by way of both layers of the fabric. Unfold the strip and lay it proper-side down (colour or print facing down). Thread the sewing machine. Now, making use of the appropriate needle gauge for the fabric variety and a straight stitch, sew 1 inch hems on the quick edges of the fabric strip. Do the exact same for the extended edges, but only make a 1/2-inch  hem. You can use a hot steam iron and an ironing board to press the hems prior to sewing them collectively. If you are generating this project with fleece, attempt making use of a zig-zag stitch alternatively of a straight one particular.

Read More:  Ingenious Ways You Can Do With Relora Weight Loss

Step 3 – Attach the Closures

Separate the hook-and-eye closures so that none are attached to every other. On 1 lengthy side of the hemmed strip, space these hooks out evenly, with about six inches in between them. The hooks need to be flush with the edge of the fabric so they will not be visible on the completed project. Make positive they are facing inward toward the center of the strip. Thread a needle and knot the finish. Function the thread in an more than-below pattern on the two prongs that hold the hook to the fabric, and do this until the hook is strongly attached to the material.

On the other side, do the same factor with the eye closures. The loop of the eye ought to be towards the edge of the fabric. Use a tape measure to make confident they line up with their hook partners.

Step four – Try It On

After you have the hooks and eyes attached, you can place the cover over the refrigerator door handle. It will match somewhat loosely. The closures ought to be on the back of the manage, facing the door.

You can leave your project as-is, or personalize it further. Try adding contrasting ribbons, rickrack, buttons or themed appliques. Make a matching cover for the freezer and oven handles.

How to Make a Refrigerator Door Deal with Cover