Wicker Porch Swing –
If wicker porch swings are part of your exterior décor, you may possibly notice that in time, these will drop their beauty and shine. You can replace the porch swings or you can repaint them. The wicker swings can be painted with standard exterior paint, but it is less difficult if you use spray paint. Repaint the swings after each and every 3 years the paint will also protect the wicker, preventing its harm.
Step 1 – Clean the Porch Swings
Dust the porch swings employing a piece of cloth or a towel. Employing a soft sponge, you will have to clean the regions that are about to be painted. Use detergents or vinegar diluted in water. Let the swings to dry.
Step 2 – Sand the Swings
Even if wicker is not an even material, if the swings have been previously painted, you will need to have to sand the area and remove the coats of paint. Use a light grain sandpaper. If you have a power sander, you may use it, but provided that the wicker swings have different indentations, the machine could be tough to use. Apply the same amount of stress at all times while sanding the porch swings or utilizing the sander.
Step 3 – Wash the Porch Swings
Soon after sanding the wicker swings, you will have to use a damp cloth or sponge to eliminate the dust and other particles that may possibly have been deposited on the swings during the sanding method. Use a gentle detergent and enable among 24 and 48 hours to dry.
Step four – Pick the Space for Painting
When painting the wicker swings, you will have to know that there will be dripping paint and also smell which might be irritating for the far more sensitive members in your family. Ideally, you should paint the swings outside, on the grass or on the porch, but placing some newspapers or cardboard on the floor to shield the porch. If you carry out this activity indoors, make confident it is in a ventilated area.
Step five – Apply the Paint
You can decide on regular exterior paint or spray paint or each. Select a colour that will match your property and porch.
The standard paint will take some time to apply and you may also have a tough time reaching particular corners or crevices with a typical paintbrush. You can opt for spray paint for these places or for painting the whole swing. This will take less time.
Make confident you cover all locations of the wicker swing. Apply 2 coats of typical paint or many light layers of spray paint. Make confident you enable the paint to dry between applying the a variety of coats. If making use of normal paint, you can add a couple of drops of citronella in the mix, as this will avoid the flies and bugs from landing on the swing whilst the paint is drying.