Pex Pipe Freeze – PEX water lines are a thermo set material that is cross linked. Despite the truth that PEX piping is produced from a high density polyethylene and is well-known specifically simply because of its potential to withstand intense hot or cold. Nonetheless, in extremely cold temperatures these lines can nonetheless freeze up. Even though this is one thing that is not common, it is nonetheless attainable. If your piping is frozen, there is a basic DIY resolution to your difficulties.
Check for Cracks
Very first, make positive that none of the water lines have cracked. Occasionally, the water will expand anytime it is frozen into ice and the eventual force of the ice expanding in the water line can simply trigger it to crack.
If there is a crack, then you will need to have to repair the complete water pipe, but otherwise continue with the thawing approach.
Turn off Water
After you have checked to make positive that your frozen PEX water line has not in truth split, you are ready to turn off the water that is top into the line. If you are in an older home, then you will typically have to shut off your principal water provide that goes directly into your house.
Nevertheless, if you happen to have a new property, then you will be capable to uncover intermediate water shut off valves that may possibly be installed. This will allow you to simply isolate the frozen water line that you are going to have to operate on.
When the water has been turned off, you will require to open up any faucets that the frozen water line connects to. This will permit you to entirely get rid of the cold water that is inside of your pipe and lowers stress so that the water can flow out of your pipe simply, once it is been completely thawed.
You are now ready to thaw your water lines. There are a couple of different methods that you can go about performing this. It will rely on what you currently have accessible as well as how hard it will be to get to your PEX water line that is frozen. The PEX piping that froze up can be heated using either a blow dryer to generate a point of heat for the ice and water to travel via.
Alternatively, you can wrap the PEX line cloths or bath towels and pour out hot water from your kettle more than the towels. If you can not access numerous components of the piping, just focus repeatedly on the lengths you can interact with. Heating these little spots considerably and consistently should ultimately market the thawing of the ice.