Purple Heart Wood Furniture – Purple heart wood is a wood taken from one particular of the 23 species of Peltogyn flowering plants. As the name suggests, what is identified as purple heart wood is an actual heartwood that, when cut, turns a rich violet shade of purple. Traditionally utilized in furnishings, cabinetry and woodturning, the allure of purple heart wood lies with its special variety of colors and high density, each of which can be negatively affected by the application of certain sorts of paint and finish. In order to properly paint purple heart wood furnishings, specific considerations should be created before therapy.
The very first step is to decide what colour you would like your purple heart wood to take. The color of purple heart wood can go anywhere from a bright, almost pink-ish purple to a purple-tinted brown to a deep purple that is virtually black at very first glance, The colour your wood will take is dependent on a number of elements how old the wood is, how considerably exposure to sunlight the wood has had and how oxidized the wood has become.
The initial aspect is largely out of your hands unless you happen to be extremely fortunate, but the other two can be influenced. To test the coloration of your wood, basically use the wood shaver to take a little quantity of shavings of the wood. Location these shavings in sunlight and record how long it requires to get the color you wish. Then, leave the rest of the wood out for just a small less than that lengthy. The subsequent handful of methods will darken the wood, so if you leave it for the exact same quantity of time, it will turn out to be as well dark.
Oil It Up
Most oil finishes will boost the finish of the wood, but the best one for the purposes of bringing out the rich, vibrant colors of purple heart wood is tung oil. In order to use this on your wood, merely apply generously to the wood with a thick coat and leave it to stand for 15-20 minutes. After this, wipe off the excess oil making use of a cloth, leaving only a thin layer of oil on the surface of the wood. Leave this to remedy overnight. The next day, take the steel wool and rub out the surface, removing any dust nibs or bleed back.
Lacquer In The Colour
After the oil is applied, the colour should have darkened to become quite close to the shade you wanted. If the color is drastically also light or dark, you can sand off the darker layer and repeat the earlier methods to get closer to your preferred colour. After you have reached the colour you’re searching for, take the nitrocellulose lacquer and apply it across the wood. This will have the impact of “locking” the colour into the wood, preventing it from altering due to UV exposure or oxidation, keeping your purple heart wood the colour you wanted.