Reliable Sources To Learn About Diy U Shaped Desk

Diy U Shaped Desk –

If you are hunting for a U-shaped desk for your residence office, constructing 1 is always an alternative. By following the actions below you can construct your personal u shaped desk total with book shelves.

Cut Your Wood

Ahead of starting, reduce out all of the wood that you will want.

  • 66″ x 18″ and 48″ x 18″ from the exact same sheet.
  • 40″ x 48″
  • 84″ x 40″
  • 30″ x 18″
  • 40″ x 30″
  • 6 15″ x 17″
  • 6 40″ x 17″


You may locate it less complicated to paint your u shaped desk before you’ve put it with each other. If you do, make positive that all of the paint is dried prior to proceeding.

Prep Wood for Assembly

Making use of a drill bit one size smaller than your screws, make two starter holes two” deep on one particular finish of the 17″ side of each of the 40″ x 17″ pieces. For the 15” x 17’ pieces, drill starter holes on each ends.

Assemble Very first Bookcase

Attach a 40” x17” piece to every finish of a 15” x 17” making use of the starter holes. Make confident the guides holes of the 40″ x 17″ pieces are facing up because they’ll be utilised later to connect the desktop. Place the second 15″ x 17″ exactly 20″ up the 40″ side, generating a shelf.

Assemble Second and Third Bookcase

Repeat the above step and then pick one particular end of the book shelf unit to be the back, drilling 3 starter holes into it in order to attach the backboard. When finished, repeat when more to develop a third bookcase. Set two of the 40″ x 15″ x 17″ cube aside.

Attach the Backboard to the 1st Side of U Shaped Desk

Attach the 48″ x 40″ backboard piece flush with 1 of the bookcase cubes so the bookcase lines up at the left side of the backboard. Using the guide holes on the back of the cube, screw the two collectively.

Attach Backboard to Long Side of U Shape Desk

Attach the second cube to the correct side of the 84” X 40” backboard piece.

Connect 2 Backboards to Form Initial Corner of the U

Put three guide holes on the left side of the the longer backboard. Then attach the two backboard pieces at that seam to form the beginnings of your L.

Attach 30” Backboard to U Shape Desk

Attach the final cube to the right side of the 30” x 40” backboard piece.

Attach Desktop to 48” Side of U

Drill 4 evenly spaced guide holes down the top edge of the 48” backboard piece. The drill two added guide holes within 17″ of the L corner on the longer piece. Location the 48″ x 18″ piece on best of the brief finish in order to make the desktop. Use the guide holes along the backboard to safe the desktop.

Attach Desktop to Lengthy Side of U and 30” side  

Adhere to the same process for the bigger section of desktop using one or two a lot more screws along the longer backboard. Then attach the 30” side following the exact same process as the first two sides.

Safe Desktop to Backboard

The 6 V brackets can now be installed to form braces among the backboard and desktop, giving further support.

Secure Short and Lengthy Desk Top Section

The 4 connectors ought to be employed to connect the two sections of desktop for extra sturdiness.

U-Shaped Desk Building |

Read More:  Learn All About Refrigerator Handle Covers