Three Way Switch With Dimmer –
Installing a 3-way dimmer switch on an existing 3-way switch circuit is not only a straightforward job, but it will add flexibility to your lighting style and enhance the all round atmosphere of your living space. The principal factor that confuses most do-it-yourselfers is the reality that only 1 of the three-way switches needs to be replaced with the dimmer switch. If you replace each existing three-way switches with two 3-way dimmers, the circuit won’t function correctly.
So, your 1st step is to believe about which of the two switches you use the most. This is the one that you must replace with the dimmer.
Here’s how to replace an existing three-way switch with a three-way dimmer switch.
Step 1: Turn off the energy to the circuit.
Step two: Take away the cover plate from the switch.
Step 3: Get rid of the two screws that secure the switch to the wall box and gently pull the switch out. Double verify with a voltage tester that the energy is off.
Step 4: Position the switch so that the side with the two screws is facing your correct.
Step five: Hold up the 3-way dimmer next to the current three-way switch in the very same manner.
Step six: Get rid of the RED wire from the existing 3-way switch and connect it to the same place on the dimmer switch. In most wiring applications, the RED is connected to the single screw on the left side of the switch.
Step 7: Take the wire that is connected to the DARK screw on the right side of the current switch and connect it to the DARK screw on the new dimmer switch.
Step eight: Take away the final wire on the switch and connect it to the bottom screw on the proper hand side of the dimmer.
Step 9: Connect the ground wire to the ground screw on the dimmer switch.
Step ten: Wrap the dimmer’s terminals with electrical tape and install it into the wall box.
Step 11: Install the new cover plate and turn the circuit back on.
That is all it takes to replace an current 3-way light switch with a much more innovative three-way dimmer switch!