Replace Window Locks – More than time window sash locks can stick and no longer operate. Window sash locks are primarily a little hinge that slide and clamp to a modest lip on the upper window. You can replace window sash locks but if you want to maintain the historical accuracy of the house and the window you are better of removing and repairing them. It is not a challenging project to do and the report that follows will show you.
Step one – Take away Window Sash Locks
You can attempt to repair window sash locks with them nonetheless attached to the windows but this could potentially damage the window. It would also most probably be a temporary repair as the wood and paint on it can at some point warp or crack and jam the latch mechanism.
Window sash locks are extremely simple to get rid of and all you will require is a tiny Philip’s head screwdriver and possibly the paint scraper. In the prime of the lock you will find a number of modest screws. They hold the lock in spot.
Eliminate them from the lock and place them off to the side in a safe spot to use them later. You can now lift the lock up off of the window. In some instances window sash locks are at times painted more than. Use a putty knife and wedge it between the lock and window and begin prying it off the wood till it is removed.
Step two – Window Sash Repair
This is optional but is worth the time to hold window sash locks functioning correctly. Use the paint scraper and scrape off all the paint where the lock will be installed. Wipe it off with a clean rag. Apply a tiny quantity of wood putty more than the region and then spread it out with the putty knife. Be careful to not get it all more than the window. If you do this prior to repairing the lock the putty will be dry and you will not have to wait to set up it.
Step three – Repair the Lock
Window sash locks are really basic which signifies straightforward to fix. Use the steel brush to eliminate any visible rust around the mechanism. Wipe it down usually with the clean rag to eliminate the oil you leave behind from your fingers. Once all the rust has been removed you can then attach the straw attachment to the lubricant and spray the mechanism. Move it from side to side until it moves freely. This will get rid of rust and debris inside the lock. Wipe it down with a clean rag.
Step four – Replace the Lock
Sand the wood putty till it is flush with the window. Location the lock in spot and then screw it down with the screws that you removed previously. Pour a small olive oil on a paper towel and buff the lock. Wipe it down with a clean rag to get rid of the oil.