Facts That Nobody Told You About Shower Diverter Not Working

Shower Diverter Not Working – If you have a combination bathtub and shower, the piece that enables the bathtub spout and shower head to coexist peacefully is the shower faucet diverter. Just as its name suggests, this mechanism is a small metal rod fitted inside your bathtub spout that can be manipulated to block the flow of water to the principal faucet (the bathtub), and divert the water so that it comes out of the shower head alternatively.

Awesome Shower Diverter Not Working

Awesome Shower Diverter Not Working

Amazing Shower Diverter Not Working

Amazing Shower Diverter Not Working

Although there are a few different motives 1 of these diverters can get stuck or fail, testing to see if you have a stuck shower faucet diverter couldn’t be easier. In fact, you will most likely discover this without having even intending to, as when you turn on your water and attempt to begin the shower, tiny to no water will actually leave the shower head with a majority of the flow remaining tied to the bath spout.

Luckily, the remedy to this problem is straightforward. Even if you wind up needing a replacement diverter, an inexpensive trip to the hardware shop and a half hour of operate is the most you will have to invest in this job. That, and potentially delaying your everyday shower, of course.

Blockages

One of the two major causes of stuck shower diverters is a blockage.

The diverter is not a difficult piece of technology. It physically moves from a single position to one more to develop a physical barrier for water. So, if buildup and blockages have formed that restrict or block the movement of the diverter, it is crippled.

The quickest fix for a blocked faucet diverter is to just give the manage a gentle, properly placed tap. Your diverter’s deal with could be a lever that you can flip like a light switch or a vertically oriented stem that you can pull up or push in. Either way, the handle is directly connected to the inner diverter. Jostling or tapping the handle in just the right way could be all that’s needed to shake a blockage loose.

Read More:  Learn All About Victorian Bathroom Ideas

Make sure you’re becoming gentle. You do not want to harm something worse than it may already be broken. If this does not perform, it doesn’t imply that you happen to be not tapping or jostling difficult enough. It implies that the issue is anything deeper than a basic blockage, and you’ll require to try a various strategy.

Elegant Shower Diverter Not Working

Elegant Shower Diverter Not Working

Lovely Shower Diverter Not Working

Lovely Shower Diverter Not Working

Luxury Shower Diverter Not Working

Luxury Shower Diverter Not Working

Corrosion

There are two regions in your bathtub spout that can corrode and influence the diverter’s function. The threads on the screw that connects the pipe to the spout can corrode or crack, and the spout’s finish can corrode, flake off, and trigger blockages. In serious cases, if such harm is left untreated and you continually try to use your shower or tub, water can trickle along the pipe and saturate the inside of the wall.

Based on what kind of faucet you have, there are two distinct approaches to see if any cracking or flaking is causing blockages.

Pull Up Faucet

Gently work the handle with the pliers, pulling it out a little at a time. As soon as you have retrieved it, clean it completely and then location it back cautiously.

Push In Faucet

Appear for the screw under the faucet spout and unscrew it, enabling you to turn faucet upside down. Use needle nose pliers to pry the black rubber washer loose. Check for any debris and take away it as necessary.

Replacement Shower Faucet Diverter

If the shower faucet diverter is stuck because the washers are old and have broken or the plastic valve diverter inside the pipe has broken, then it is time to replace the faucet itself. The diverter is not an overly pricey mechanism to purchase and replacing it may be simpler than attempting to repair it.