Sliding Garage Door – A sliding garage door is related to barn doors, as they do not open by lifting them, but rather slide open. There are many designs of these doors from automatic to manual function as effectively as design and style a variety of components. The write-up that follows will show you how to set up a manual sliding garage door.
Line up the Track
A sliding garage door utilizes a track and wheel system much like a sliding glass door. Making use of the tracks that the doors slide on is the greatest way that you have to lining up the doors and pilot holes. Location the best track on the ceiling of the garage across the opening. The sliding garage door system you purchased will have guidelines that will go into great detail on your certain needs. Use the level to make sure it is straight. If you have a method with much more than two doors, then comply with the directions for placement of the other tracks. Repeat the identical approach for the bottom sliding garage door track.
With the track is level, use the holes in the track as a guide and mark them with a pencil. Eliminate the track and then drill the pilot holes where you marked them. Use a measuring tape to make confident the leading track and the bottom track line up properly. After they are lined up with every other, mark the pilot holes for the bottom track. Get rid of the bottom track and make the pilot holes. If you are dealing with concrete floors, then develop pilot holes with a masonry bit. Install concrete anchors by tapping them into the pilot holes.
Mount the Tracks
As soon as you have all of the pilot holes drilled, you can begin to mount the tracks. Use either bolts or wood screws that are at least two inches lengthy. They need to have to be galvanized steel and heavy-duty. At times, the hardware that came with the track is not the greatest, so use excellent judgment on no matter whether or not to use it. Prior to installing the screws or bolts, location a handful of droplets of wood glue over the holes. When you insert the screws, they will tunnel by way of the glue, distributing it by means of the channel. This creates a stronger bond. Repeat the procedure for the bottom track. If installing in concrete, then don’t use any adhesive.
Some sliding garage doors systems will have vertical tracks that frame the sides of the opening. These are installed in the very same manner as the prime and bottom tracks.
Set up the Sliding Garage Door
These tracks are typically made for two doors which slide behind every single other when they are opened. Lift the 1st door and place it on the track followed by the second door on the empty track. This call for assistance as the doors are heavy and awkward.