Unbelievable Facts About Cast Iron Sink Refinishing

Cast Iron Sink Refinishing –

cast iron kitchen sink is fairly typical in many nations about the world, thanks to its quaint charm, durability and value-worthiness. Some of the older units are even valued as valuable antiques and can attract considerable delivers from on the web auction bidders. The enamel coat of these sinks, nevertheless, tends to get sullied with time and may possibly even start to chip off. Care need to be taken to refinish the sink in order to restore its good looks, and the sooner a single does so, the much better. The actual refinishing procedure is quite basic, expenses little and should not take more than an hour or two of your spare time. Here are the measures you must adhere to.

Also, be certain to wear protective gloves and any other suitable safety gear.

Step 1–Prepare the Work Location

Make certain you cover the adjacent places with masking tape before you beginning refinishing your kitchen. In this way, you will keep away from daubing them inadvertently with primer, topcoat or paint.

Step 2–Clean the Kitchen Sink with Detergent

Soak a sponge with a nonabrasive cleaning detergent and wipe the kitchen sink to take away its stains. There are detergent brands which are specially made for the cleaning of cast iron equipment, so you might want to use any of them. When you are completed cleaning, enable the detergent to remain overnight if this is what the manufacturer’s instructions recommend. Otherwise, rinse with clean water and proceed to the subsequent step.

Step 3–Sand the Kitchen Sink

Take some fine-grit sandpaper and scrub the surface region of the sink, attempting to remove as much of the enamel coat as achievable. Nonetheless, do not overdo it and be careful not to harm the cast iron base itself. On the other hand, removing or optimally roughening up the enamel coat will give for a better bonding amongst the cast iron and the new primer coat you will apply.

Read More:  Facts That Nobody Told You About Orange And Brown Living Room

Step 4–Protect with Epoxy Primer

Dip a roller or brush in a can of epoxy primer and cover the kitchen sink with a coat of this material, using light, steady strokes and watching out not to leave any brush traces or big primer beads. Repeat this step a couple of times to make certain better protection of the sink. Make confident to let each and every primer coat dry up nicely just before you apply the next 1.

Step 5–Finish the Renovation of the Kitchen Sink

Clean the roller or brush you have utilised for the epoxy primer and apply an acrylic topcoat to the kitchen sink. Let time to dry according to the product’s guidelines. Soon after that, if you want to adjust the color of the kitchen sink, you can apply a thin coat of paint of your decision.

After you are carried out refinishing, stay away from the kitchen sink for a day or two to stay away from dirtying its new coat. When the topcoat/paint has totally dried, you can resume employing the cast iron kitchen sink.

How to Refinish a Cast Iron Kitchen Sink