Ball Catch Door – A ball catch is generally utilized on linen closet doors where a latch is not utilised or needed, but it can also be used on kitchen cabinet doors or where two double doors meet without a center door jamb. They are utilised mainly for interior doors and can be used nearly anyplace for light duty use. The ball catch comes in two pieces with a assortment of finishes and colors accessible. One half contains a spring loaded ball, and the other half (the striker) has a cup or little U-shape formed in the middle. The ball catch can be mounted on the leading, bottom, or side of the door. Here is a how-to on mounting this sort of hardware in your interior doors.
Drill a Hole
Using an electric drill, drill a hole on the edge surface of the door at the location you wish.
Mount the Strike Plate
Mount a strike plate on the door jamb that is opposite to where the spring loaded ball catch location is. This holds the door closed. A pull on the door will release the catch. When installing the strike plate, be aware of the following two issues:
- Lining up the striker and ball catch correctly.
- Figuring out the depth of the recessed hole that is necessary for correct operation.
In order to make your life easy with regard to producing positive the depth is appropriate, acquire an adjustable unit which can be made longer and shorter to obtain the appropriate tension against the striker.
Addressing the task of lining them up is a bit tougher. Use some carbon trace paper with the shinny carbon facing against the opposite surface exactly where the ball catch is situated. Hold the paper in this area and close the door. The ball catch will roll more than the paper when you close the door and make a line on the surface. Exactly where the line stops or ends is the middle place for the striker cup. Mount the striker according to this line.
Add the Door Handles
Dummy door knobs, fancy handles, or something you can picture can be utilized on the doors due to the fact you do not need to turn them in order for them to open or close. A slight tug is all that you will require to do.
Add a small bit of a light oil on the ball catch, and wipe off the excess. This is all that is necessary in order to obtain smooth operation and years of trouble-free of charge service.
In some situations where the doors could stay open (an instance of this might be French double doors major into the dining room), it would be far better to place the ball catch in the frame portion at the top, and the striker cup on the door best edge. This will avert a mark on the frame, which would be produced by the ball catch rolling more than the frame until it reached the cup.
You now have a door that will remain closed with out a traditional door knob!