Brick Paver Repair – If you have a brick paver patio, it is frequent for some of the bricks to not be entirely flush. Fortunately, leveling your patio isn’t difficult to do, no matter what brick-paver patio design you have. The approach requires figuring out which of the bricks are sunken through the use of a furring strip and/or level, removing the sunken brick(s), and adding sand to raise the brick(s).
This how-to article will discuss the necessary steps, along with the correct tools and supplies, for repairing your brick paver patio.
Lay Out a Furring Strip
You will need to have to mark the bricks that do not sit flush in your brick patio. You can do this by using a furring strip.
A furring strip is a thin piece of wood that types a frame or template used when developing basement walls and decks made with concrete blocks or paver bricks. The furring strip makes it possible for you to keep the pattern for the deck. You can buy a furring strip at a house-improvement center, or you can develop one yourself with vinyl or wood-veneer strips.
Spot the furring strip across the length of the area and mark the bricks that seem under the line of the strip. You can also do this with a level, but utilizing the furring strip will make the activity of identifying sunken bricks go more quickly and less complicated.
Get rid of Marked Bricks
When you have identified the bricks that are sunken and in need to have of leveling, use a trowel to cautiously eliminate them from their spots. If the paver is damaged, you need to have to have replacement ones on hand to put in spot of the damaged ones. Whether or not you have bought pre-reduce pavers to the proper size or you’ve reduce them yourself, make certain they are the exact same size as your broken ones.
If you have a huge number of them that are sunken, it is very best to perform on leveling the sunken bricks a single at a time, particularly if you are unable to comprehensive the project in a single afternoon.
Add Sand to Level Bricks
Soon after removing the sunken brick, spot an acceptable amount of multipurpose sand into the resulting spot to level it. This method involves trial and error because you will not know how significantly sand to place into the hole till you spot the paver inside and check the level. This is also why you need to perform a single paver at a time.
Level the Sand and Reposition Bricks
When adding the sand, use the back of the trowel or the level to smooth the sand out just before placing the brick inside. You want as smooth a surface as possible when putting the brick paver in to create the even level you are looking for. Repeat this process for every single sunken paver.
Brick Paver Patio Repair: How to Level Sunken Bricks