Reliable Sources To Learn About Septic Tank Lid

Septic Tank Lid –

A septic tank lid is the uppermost portion of the sewage tank. This lid needs to be removed each handful of years in order to empty the tank. Depending on the size of the tank a homeowner will want to have the septic tank emptied every single three to five years. It is important not to let the tank get also complete, commence to back up into the house, or overflow out of the lid. This causes severe harm to the tank. Removing the lid is an straightforward job that can be carried out ahead of the pumping service gets there.

Step 1: Find Septic Tank

If you have just bought a house, or are getting the septic tank pumped out for the very first time you will need to have to locate the tank itself. Based on the size of your lot, and the kind of ground you are on (sand, ledge, clay) the tank can be just about anyplace. It must be stated in your house deed where the tank is located, but it may be approximate. There are three surefire approaches to find the tank, but they do demand time.

Use a metal detector to locate the septic tank. Most tanks today are produced out of concrete material, but they have metal rebar in them. With the use of a metal detector you can go to the approximate location and begin browsing. One you locate the tank, it is a matter of digging up to uncover the lid.

Use a metal pole to poke into the earth to find the tank. This can be time consuming if the home deed is not right. Merely poke the metal pole into the earth about 12 to 14 inches. When you strike one thing strong continue in the area to establish that it is the tank.

Read More:  Reliable Sources To Learn About Cleaning Bamboo Floors

You can also adhere to the drain pipe that comes from your home. Nonetheless, this approach entails digging up your yard to adhere to the pipe to the tank.

Step 2: Dig Up Septic Tank Lid

Following you have discovered the septic tank, you can commence the approach of digging up the lid. Use a shovel to excavate the ground around the tank till you uncover the lid. It will be flat against the tank with a small seam about it. Dig the ground to produce at least 16 inches of clearance on all sides of the lid. It is also recommended that you slope the land as you dig down to the lid so that the gravel will not fall back in.

Step 3: Pry Off Septic Tank Lid

Depending on the size of the septic tank, the lid can be very heavy. It is a strong piece of concrete that is flat on all sides. It could have a manage to pull on. The majority of lids will require a prybar to lift them out of their seating. Set the prybar in the seam and press down. As the lid lifts out of the hole, have someone move it to the side. Set the lid on the surface of the ground out of the way of the pumping vehicle.

How to Get rid of a Septic Tank Lid