Replacing Fence Posts – Practically all goods produced from wood are higher maintenance, and that signifies continual upkeep and repair. Wooden fence posts fall into that category and occasionally posts want to be repaired or replaced.
Typically repairing a wooden fence post means replacing it, but whether you repair or replace a fence post, it is a straightforward do-it-yourself project.
Make the Decision
The choice is to repair or replace is easily determined by the type and level of damage. Since fence posts assistance the fence itself, if there is any doubt about the posts integrity it must be replaced. If the harm is, nonetheless, minor such as a leaning, shrinking, or wobbling post, you can make the essential repair to aid avert further deterioration.
Level the Post
Repairing a leaning post requires detaching the current fence from the offending post and digging around it to attain the bottom of the post. Most fence posts are set in a concrete footing to supply strength and help for the fence. So right after digging up the leaning post, break up the old footing with a sledge hammer and take away the old the concrete. Reset the post in the ground, creating sure to that it is level and plumb and square to the fence. It is useful to the brace the post temporarily to preserve it level and plumb although you pour a new concrete footing. After the footing has setup, then reattach the fence employing new galvanized nails.
Appropriate the Wobble
If your fence post is wobbly, it might from shrinking inside the concrete footing. As lengthy as the integrity of the footing is great, a quick term remedy may be to shim the bottom of the post all the way about and caulk the shims in place employing exterior silicon variety caulking.
Exactly where there is no concrete footing about the original post, one more resolution to the wobbling post is to use what is named a sister post. A sister post is a thinner post of the same width as the current post. Drive it into the ground subsequent to the existing post to a depth of a couple of feet or far more. Bolt together the two posts to give assistance. Of course, you could just dig an appropriate hole about the original post and pour a concrete footing.
Replacing a Fence Post
If the current post is cracked beyond repair, or as often happens with wood fence posts, they rot below the ground (in the footing), then you have no decision but to replace the post with a new a single. In reality if you have any doubt about the integrity of a fence post, the very best thing to do is simply replace it. The method is the very same as the answer to a leaning fence post.
Separate the fence from the post to be replaced, then dig up the old post removing it and the old concrete footing. Location the new fence post in the current hole and pour a new concrete footing. Preserve in thoughts, it is often a excellent thought to temporarily brace the new post to keep it level and plumb even though the new footing cures. Following the footing has setup and cured, you can then reattach the fence remembering to use new nails.
A second answer, which generally does not call for detaching the existing fence is to location a new shorter post subsequent to the rotting post. Dig around the rotten post and reduce it just above the rotten point with a reciprocating saw, so as to be able to pull it out of the ground. Then place a new second post in the hole, bolting the posts collectively. Generating sure they are plumb, and then pour a new concrete footing to hold the second shorter post. Once again, it is always a excellent notion to temporarily brace the new post whilst the footing cures.
The Moral of the Story
The beauty of a wooden fence is unmistakable and normal sealing of your fence either with a good water sealer or paint assists to protect it, but regardless of your vigilance, a wooden fence is a higher upkeep item that will require regular repair. Repairing a wooden fence post, nevertheless, is a straightforward do-it-yourself project.